Supero SuperWorkstation 7045A-WT, Руководство пользователя

Страница: 10 / 144

1-2
S
uper
W
orkstation 7045A-WT User's Manual
1-2 Serverboard Features
At the heart of the SuperWorkstation 7045A-WT lies the X7DWA-N, a dual proces-
sor serverboard based on the Intel 5400 chipset and designed to provide maximum
performance. Below are the main features of the X7DWA-N. (See Figure 1-1 for a
block diagram of the 5400 chipset).
Processors
The X7DWA-N supports single or dual LGA771 type Intel Xeon 5400/5300/5200/5100
Series processors at a FSB speed of 1600/1333/1066 MHz. Please refer to the
serverboard description pages on our web site for a complete listing of supported
processors (www.supermicro.com).
Memory
The X7DWA-N has eight 240-pin DIMM slots that can support up to 64 GB of FBD
(Fully Buffered DIMM) ECC DDR2-800/667/533 SDRAM. The memory operates in
an interleaved confi guration and requires requires modules of the same size and
speed to be installed two at a time. See Chapter 5 Section 5 for details.
Serial ATA
A SATA controller is integrated into the ESB2 (South Bridge) portion of the 5400
chipset to provide a six-port 3 Gb/s Serial ATA subsystem, which is RAID 0, 1, 10
and 5 supported. The Serial ATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The X7DWA-N has two PCI-Express x16 Gen 2 slots, two 64-bit 133/100 MHz PCI-X
slots, one PCI 33 MHz slot, an IPMI slot and a UIO slot (see below).
UIO
The X7DWA-N is a specially-designed serverboard that features Supermicro's
UIO (Universal I/O) technology. UIO serverboards have a PCI-Express x8 con-
nector that can support any one of several types of UIO card types to add SAS
ports, additional LAN ports, etc. to the serverboard. This allows the user to tailor
the serverboard to their own needs. Note: the 7045A-WT does not come with a
UIO card installed.