Supero SuperServer 7044A-82R, Руководство пользователя

Страница: 3 / 126

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 7044A-82R.
Installation and maintainance should be performed by experienced technicians
only.
The SuperServer 7044A-82R is a high-end, dual processor 4U tower/rackmount
server based on the SC942i-R760 4U rackmount server chassis and the X6DA8-
G2, a dual processor serverboard that supports single or dual Intel Nocona
TM
at
a Front Side (System) Bus speed of 800 MHz and up to 16 GB of registered 400
MHz DDR2 SDRAM.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the SUPER X6DA8-G2
serverboard and the SC942i-R760 chassis, which comprise the SuperServer
7044A-82R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 7044A-
82R into a rack and check out the server configuration prior to powering up the
system. If your server was ordered without processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their
installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.