Supero SUPERSERVER 6027R-TRF Скачать руководство пользователя

Страница: 77 / 102

Chapter 7: BIOS

7-7

Factory Long Duration Maintained

This item displays the period of time set by the manufacturer during which long

duration power is maintained.

Long Duration Maintained

This item displays the period of time during which long duration power is

maintained.

Recommended Short Duration Power

This item displays the short duration power settings recommended by the

manufacturer.

Short Duration Power Limit

This item displays the period of time during which short duration power is

maintained.



Chipset Confi guration



North Bridge

This feature allows the user to confi gure the settings for the Intel North Bridge.



IOH (IO Hub) Confi guration

Intel VT-d

Select Enabled to enable Intel Virtualization Technology support for Direct I/O

VT-d by reporting the I/O device assignments to the VMM (Virtual Working

Memory) through the DMAR ACPI Tables. This feature offers fully-protected

I/O resource sharing across Intel platforms, providing greater reliability, security

and availability in networking and data-sharing. The options are

Enabled

and

Disabled.

Intel® I/OAT

The Intel I/OAT (I/O Acceleration Technolgy) signifi cantly reduces CPU overhead

by leveraging CPU architectural improvements, freeing the system resource for

other tasks. The options are

Disabled

and Enabled.

DCA Support

Select Enabled to use Intel's DCA (Direct Cache Access) Technolgy to improve

data transfer effi ciency. The options are

Enabled

and Disabled.

Содержание SUPERSERVER 6027R-TRF







































































































Результаты поиска

Содержание SUPERSERVER 6027R-TRF

Отзывы:

Похожие инструкции для SUPERSERVER 6027R-TRF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 6027R-TRF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 6027R-TRF

Отзывы:

Похожие инструкции для SUPERSERVER 6027R-TRF

Бренды по названию

Популярные бренды