Supero SuperServer 5017R-MF, Руководство пользователя

Страница: 89 / 106

Chapter 7: BIOS
7-21

BMC Self Test Log
This feature logs any BMC messages returned during a BMC self-test. It shows the
total number of entries and will allow the viewing of each event by scrolling down.
Erase Log - Select Yes, On every reset or No.
When Log is Full - Select Clear Log or Do Not Log Anymore.

System Event Log
This feature is used to change the Sytem Event Log (SEL) confi guration.
SEL Components - Change this item to enable or disable all features of System
Event Logging. The options are Enabled and Disabled. When Enabled, the
following can be confi gured:
Erase SEL - This option erases all logged SEL events. The options are No,
Yes, On Next reset and Yes, On Every reset.
When SEL Full
This option automatically clears the System Event Log memory of all messages
when it is full. The options are Do Nothing and Erase Immediately.
Log EFI Status Codes
This option enables or disables the logging of Extensible Firmware Interface (EFI)
status codes. The options are Disabled, Both , Error Code and Progress Code.

BMC Network Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address.
Confi guration Source
This feature selects whether the IP address, Subnet Mask and Gateway Address
are automatically assigned by the network's DHCP server (Dynamic Host and Con-
fi guration Protocol) "Dynamic" or manually entered by the user "Static". If Static is
selected, the IP Address, Subnet Mask and Gateway Address must be manually
entered below. When Dynamic is selected, all the options below are automatically
assigned to the system by itself or by an external DHCP server.
The options are Unspecifi ed , Static, Dynamic-obtained by BMC, Dynamic-Loaded
by BIOS, and Dynamic-BMC running other Protocol. The following items are dis-
played when Static is selected:
Station IP Address - Enter the IP address for this machine. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253). The value of each three-
digit number separated by dots should not exceed 255.