Supero SUPERO X8DTT-H Скачать руководство пользователя страница 85

Страница: 85 / 91

Appendix B: Installing the Windows OS

B-1

Appendix B

Installing the Windows OS

After all hardware components have been installed, you must fi rst confi gure Intel

South Bridge RAID Settings before you install the Windows OS and other software

drivers. To confi gure RAID settings, please refer to RAID Confi guration User Guides

posted on our web site at www.supermicro.com/support/manuals.

Note: The

following OS installation instructions are written for the Windows

XP/2003 OS only. If you have the Windows 2008 or Windows Vista OS,

please follow the instructions displayed on your screen to install the OS.

B-1 Installing the Windows OS to a RAID System

Insert Microsoft's Windows XP/Windows 2003 Setup CD in the CD Drive, and

the system will start booting up from CD.

Press the <F6> key when the message-" Press F6 if you need to install a

third party SCSI or RAID driver" displays.

When the Windows XP/Windows 2003 Setup screen appears, press "S" to

specify additional device(s).

Insert the driver diskette-"Intel AA RAID XP/2003 Driver for ICH10R" into

Drive A: and press the <Enter> key.

Choose the Intel(R) ICH10R

SATA RAID Controller

from the list indicated in

the XP/2003 Setup Screen, and press the <Enter> key.

Press the <Enter> key to continue the installation process. (If you need to

specify any additional devices to be installed, do it at this time.) Once all

devices are specifi ed, press the <Enter> key to continue with the installation.

From the Windows XP/Windows 2003 Setup screen, press the <Enter> key.

The XP/2003 Setup will automatically load all device fi les and then, continue

the Windows XP/Windows 2003 installation.

After the Windows XP/Windows 2003 OS Installation is completed, the sys-

tem will automatically reboot.

Содержание SUPERO X8DTT-H




























































































Результаты поиска

Содержание SUPERO X8DTT-H

Отзывы:

Похожие инструкции для SUPERO X8DTT-H

Бренды по названию

Популярные бренды

Supero SUPERO X8DTT-H, Руководство пользователя

Результаты поиска

Содержание SUPERO X8DTT-H

Отзывы:

Похожие инструкции для SUPERO X8DTT-H

Бренды по названию

Популярные бренды