Supero Supero SUPERSERVER 6016T-T, Руководство пользователя

Страница: 51 / 102

Chapter 5: Advanced Serverboard Setup
5-17
Wake-On-LAN
The Wake-On-LAN header is des-
ignated JWOL on the serverboard.
See the table on the right for pin
defi nitions. You must enable the LAN
Wake-Up setting in BIOS to use this
function. (You must also have a LAN
card with a Wake-On-LAN connector
and cable to use this feature.)
Universal Serial Bus (USB)
There are two Universal Serial Bus
ports located on the I/O panel and
fi ve additional USB headers located
on the serverboard. The headers,
labeled USB2/3 and USB4/5, can be
used to provide front side USB access
(cables not included). USB 6 is an A
Type. See the tables on the right for
pin defi nitions.
Wake-On-LAN
Pin Defi nitions
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
USB Ports Pin
Defi nitions
(USB0/1/6)
Pin# Defi nitions
1 +5V
2 PO-
3 PO+
4 Ground
5 N/A
USB Headers
Pin Defi nitions (USB2/3, USB4/5)
USB2/4
Pin # Defi nition USB3/5
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 No connection
Serial Ports
Two serial ports are included on the
serverboard: COM1 is a port located
beside the USB ports and COM2 is
a header located on the corner of the
board near the SIMLC slot. See the
table on the right for pin defi nitions.
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Serial Port Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC