Supero Supero SuperServer 5016I-T Скачать руководство пользователя

Страница: 82 / 98

7-16

UPER

ERVER 5016I-T/5016I-TF User's Manual

CPU on-die temperature increases, the fan speed will also increase, and vice versa.

Select Workstation if your system is used as a Workstation. Select Server if your

system is used as a Server. Select “Disabled, (Full Speed @12V)” to disable the

fan speed control function and allow the onboard fans to constantly run at the full

speed (12V). The Options are:

Disabled

, 4-pin (Server), and 4-pin (Workstation).

Fan1 ~ Fan 6 Reading

This feature displays the fan speed readings from fan interfaces Fan1 through

Fan5.

Vcore, AVCC, 3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3Vsb, and Vbat

ACPI Confi guration

Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)

power management settings for your system.

High Performance Event Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces

periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in

synchronizing multimedia streams, providing smooth playback and reducing the de-

pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-

tion embedded in the CPU. The High Performance Event Timer is used to replace

the 8254 Programmable Interval Timer. The options are

Enabled

and Disabled.

ACPI Aware O/S

Enable ACPI support if it is supported by the OS to control ACPI through the Operat-

ing System. Otherwise, disable this feature. The options are

Yes

and No.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.

The options are Enabled and

Disabled

Headless Mode

This feature is used to enable the system to function without a keyboard, monitor

or mouse attached The options are Enabled and

Disabled

Содержание Supero SuperServer 5016I-T



































































































Результаты поиска

Содержание Supero SuperServer 5016I-T

Отзывы:

Похожие инструкции для Supero SuperServer 5016I-T

Бренды по названию

Популярные бренды

Supero Supero SuperServer 5016I-T, Руководство пользователя

Результаты поиска

Содержание Supero SuperServer 5016I-T

Отзывы:

Похожие инструкции для Supero SuperServer 5016I-T

Бренды по названию

Популярные бренды