M35S and M35T1 Mobile Rack User's Guide
4-2
Removing Hard Drive Carriers from the Mobile Rack
Push the release button on the hard drive carrier, which will extend the drive
1.
handle.
4-3 Installation
Procedures
Use the following installation procedures to set up the mobile rack.
WARNING!
SAS IDs are assigned automatically by the backplane. Do not
set ID's manually on the drives.
SAS termination is enabled by default on the SAS backplane.
!
Removing Hard Drive Carriers from the Mobile Rack
The hard drives of the M35S and M35T1 mobile racks are mounted in drive carriers
to simplify their installation and removal from the chassis. These carriers also help
to promote proper airfl ow within the mobile rack drive bays.
Figure 4-1: Hard Drive Carrier Release Button
Release Button
