background image

2-2

M28E1 and E2 Mobile Rack User's Guide

Additional Information

The M28E1/M28E2 mobile rack was designed for use in certain chassis and servers 

or as a stand alone unit. Use the chassis or server manual for installation instruc-

tions. Use the instructions listed in this manual to use the mobile rack independent 

of a chassis.

The pictures or graphics shown in this user’s guide were based upon the latest 

PCB revision available at the time of publication of this manual. The M28E1/M28E2 

mobile rack may or may not look exactly the same as the graphics shown in this 

manual.

The availability of the SAS devices supported depends upon the readiness of fi rm-

ware and hardware support.

The SASM28 mobile rack backplane and SASEXP-M28 expander card have been 

designed to utilize the most up-to-date technology available, providing your system 

with reliable, high-quality performance. 

This manual refl ects SASM28 Revision 1.00 and SASEXP-M28 Revision 1.01A, 

the most current releases available at the time of publication. Always refer to the 

Supermicro Web site at www.supermicro.com for the latest updates, compatible 

parts and supported confi gurations.

Содержание Supero M28E1

























Отзывы: