Supero SUPER P6SLA, Руководство пользователя и BIOS

Страница: 29 / 91

SUPER P6SLA/P6SLE User’s Manual
2-4
4. Slide the clip (A) on each support toward the processor,
exposing the hole that will fit over the peg on the motherboard.
Push the latches (B) on the processor toward the center of the
processor until they click into place.
5. Hold the processor so that the fan shroud is facing toward the
pegs on the motherboard. Slide the processor (C) into the
retention mechanism and slide the supports onto the pegs.
Ensure that the pegs on the motherboard slide into the holes in
the heatsink support and that the alignment notch in the SEC
cartridge fits over the plug in Slot 1. Push the processor down
firmly, with even pressure on both sides of the top, until it is
seated.
Figure 2-3. Retention Mechanism
B
C
A
Do not screw too tightly!