Supero SUPER P5MMA2, Руководство пользователя

Страница: 25 / 64

1-17
Chapter 1: Introduction
CPU Fan Auto-Off in Sleep Mode
The CPU fan will turn on when the power is on. It can be turned off
when the CPU is in sleep mode. When the CPU is in sleep mode,
it means that it will not run at full power, thereby generating less
heat. For power saving purposes, the user can have the option to
shut down the CPU fan.
CPU Overheat Alarm, LED, and Control
The user can connect the chassis LED to the on-board overheat
LED connector. The LED will light up when the CPU is overheated,
it will turn off once the back-up fan cools down the CPU to the
normal temperature. The user can also connect a buzzer/alarm to
the on-board overheat fan connector to get an audio warning when
CPU overheat condition occurs.
Chassis Intrusion Detection
The chassis intrusion circuitry can detect unauthorized intrusion to
the system. The chassis intrusion connector is located on J50 for
P5MMA98 (2 pin) and on J59 for P5MMS98 (3 pin). Attach a micro-
switch to J50 or J59. When the micro-switch is close, it means that
the chassis has been opened. The circuitry will then alert the user
with a warning message when the system is turned on. The cir-
cuitry uses the on-board battery to power up. Even if the whole
system is powered off, the detection can still work properly.
System Resource Alert
This feature is available when used with Intel LANDesk Client Man-
ager. The user can be notified of certain system events. For ex-
ample, if the system is running low on virtual memory, the hard
drive space is not enough to save the data, you are then alerted of
the potential problems.