Supero SC819 Series, Руководство пользователя

Страница: 40 / 80

SC819 Chassis Manual
4-6
4-6 Overheating
The section lists actions that should be taken in the unlikely event the server
overheats.
Overheat Temperature Setting
Some backplanes allow the overheat temperature to be set at 45, 50, or 55 degrees
Farenheit by changing a jumper setting. For more backplane information, see the
appendix at the back of this manual or download the backplane user manual at
www.supermicro.com. To access the manuals on the Website, click Support, and
then click the Manuals link.
Overheating Condition
If the server overheats, do the following:
1. Use the LEDs to determine the nature of the overheating condition.
2. Confirm that the chassis covers are installed properly.
3. Check the routing of the cables and make sure all fans are present and oper-
ating normally.
4. Verify that the heatsinks are installed properly.