Supero PDSM4 Скачать руководство пользователя страница 55

Страница: 55 / 103

4-4

PDSM4/PDSME User's Manual

Parallel ATA

This setting allows the user to enable/disable the function of the Parallel ATA and

confi gure Parallel ATA settings. The options are

Enabled

and Disabled.

Serial ATA

This setting allows the user to enable or disable the function of the Serial ATA.

The options are Disabled and

Enabled.

Native Mode Operation

Select the native mode for the ATA. The options are: Serial ATA and

Auto

SATA Controller Mode

Select

Compatible

to allow the SATA and PATA drives to be auto-detected and

placed in the Legacy Mode. Select Enhanced to allow the SATA and PATA drives

to be auto-detected and placed in the Native IDE Mode. (

*Note: The Enhanced

mode is supported by the Windows 2000 OS or a later version.)

When the SATA Controller Mode is set to "Enhanced", the following items will

display:

Serial ATA (SATA) RAID

Select Enable to enable the function of the Serial ATA RAID. The options are

Enabled and

Disabled

(*Default). (*For the Windows OS environment, if this

feature is set to Enabled, be sure to use the RAID driver. If set to

Disabled

, use

the Non-RAID driver.) (*Note: If this item-SATA RAID is set to Enabled, the next

item-"SATA AHCI Enable" will not be available. If this feature is set to "Enhanced",

the following feature will be available:)

SATA AHCI

Select Enable to enable the function of the Serial ATA Advanced Host

Interface.

Warning:

Exercise extreme caution when using this function. This

feature is for advanced programmers only.) The options are Enabled

and

Disabled

ICH RAID CodeBase

Select Intel to enable Intel's ICH RAID Controller for the Windows OS. Select

Adaptec to enable Adaptec's RAID Controller for the Linux OS. The options are

Intel

and Adaptec.

Содержание PDSM4








































































































Результаты поиска

Содержание PDSM4

Отзывы:

Похожие инструкции для PDSM4

Бренды по названию

Популярные бренды

Supero PDSM4, Руководство пользователя

Результаты поиска

Содержание PDSM4

Отзывы:

Похожие инструкции для PDSM4

Бренды по названию

Популярные бренды