Supero PDSBM-LN1, Руководство пользователя

Страница: 59 / 95

Chapter 4: BIOS
4-13
X
Onboard PCI-Exp. x1 GNIC2 (*For PDSBM-LN2/LN2+ Only)
Access the submenu for each of the settings above to make changes to the
following:
PCI Express Port#6 GNIC2
Select Enabled to always enable PCI-Ex1 Port#6 GNIC2. Select Disabled to
disable PCI-Ex1 Port#6 GNIC2. The options are Auto , Enabled and Disabled.
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the device specifi ed as the PCI bus master.
The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for the Bus Master. A high-priority,
high-throughout device may benefi t from a greater clock rate. The options are
Default , 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix,
Novelle and other Operating Systems, please select the option: other. If a drive
fails after the installation of a new software, please change this setting and try
again. A different OS requires a different Bus Master clock rate .
X
PCI-E x4 Slot 6/PCI 33 Slot 5/PCI 33 Slot 6
Access the submenu for each of the settings above to make changes to the
following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the device specifi ed as the PCI bus master.
The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for the Bus Master. A high-priority,
high-throughout device may benefi t from a greater clock rate. The options are
Default , 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix,
Novelle and other Operating Systems, please select the option: other. If a drive
fails after the installation of a new software, please change this setting and try
again. A different OS requires a different Bus Master clock rate .