H8DCL-i/6(F) Serverboard User's Manual
2-14
Compact Flash Card PWR Connector
Two Compact Flash Card Power Connector
is located at JWF1. For the Compact Flash
Card to work properly, you will need to
enable with JCF1 and connect a Compact
Flash Card power cable to JWF1.
Video Connector
A Video (VGA) connector is located below
the COM Port on the IO backplane. This
connector is used to provide video and CRT
display.
Power I2C
The JPI2C1 header is for power I
2
C, which
may be used to monitor the status of the power
supply, fan and system temperature. See the
table on the right for pin defi nitions.
Power I
2
C
Pin Defi nitions
(JPI2C1)
Pin# Defi nition
1
Data
2
Ground
3
Clock
4
NC
SATA DOM Power Connector
The SATA DOM Power on JWF2 is used
to supply power to SATA Disk-On-Module
(DOM) solid-state storage devices.
SATA DOM Power
Connector Pin
Defi nitions (JWF2)
Pin# Defi nition
1
VCC
2
Ground
3
Ground
