Supero FatTwin F617R2-F73, Руководство пользователя

Страница: 100 / 144

6-16
FatTwin F617R2-FT/F73 USER'S MANUAL
Figure 6-15: Assembling the PCIE Slot Bracket and Riser Card
Assembling the PCIE Slot Bracket Assembly
Each node supports one expansion card. This expansion card must be plugged into
a riser card, which in turn plugs into the motherboard.
Assembling the PCIE Slot Bracket Assembly
1. Power down the system and remove the power cords from the rear of the
power supplies as described in Section 6-3. Remove the node from the
chassis as described in Section 6-5 and remove the cover from the node as
described in Section 6-6.
2. Open the PCIE slot clip and remove the PCIE slot shield. (See the illustration
on the previous page)
3. Remove the three mounting screws securing the PCIE slot bracket to the
node.
4. Lift the PCIE slot bracket out of the node.
Riser Card
PCIE Slot
Bracket
Card
Mounting
Screws