Supero C9Z390-CG, Руководство пользователя

Страница: 101 / 133

Chapter 4: UEFI BIOS
4-33

PEG Port Configuration
CPU SLOT 6 PCI-E 3.0 X16
CPU SLOT 3 PCI-E 3.0 X8(IN X16)
CPU SLOT 1 PCI-E 3.0 X4
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled,
Enabled, and
Auto .
Max Link Speed
Select Auto , Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
VT-d
This feature enables VT-d. The options are Disabled and Enabled .
GNA Device (B0:D8:F0)
This feature enables the SA GNA device. The options are Disabled and
Enabled .
X2APIC Opt Out
This feature enables X2APIC Opt Out. The options are Disabled and
Enabled.

Graphics Configuration
Graphics Turbo IMON Current
Use this feature to set the limit on the current voltage regulator. The
range is 14-31. Default is
31 .
Skip Scanning of External Gfx Card
By default the computer will scan for External Gfx Card on PEG and PCH
PCI-E Ports. If this feature is enabled, the system will not scan for a new
card. The options are Disabled and Enabled.
Primary Display
Use this feature to select the graphics device to be used as the primary
display. Select from IGFX/PEG/PCI or select SG for switchable GFX. The
options are Auto , IGFX, PEG, PCIE, PCI, and SG.
SG Delay After Power Enable
Enter a value for Switchable Graphics Delay after powered on. The de-
fault is
300 .