Supero C9Z390-CG-IW, Руководство пользователя

Страница: 96 / 115

4-34
Supermicro C7Z390-CG-IW Motherboard User’s Manual
Above 4GB MMIO BIOS Assignment
Select Enable for remapping of BIOS above 4GB. The options are Dis-
abled and Enabled.
BME DMA Mitigation
This feature re-enables Bus Master Attribute. The options are Disabled
and Enabled.
CPU SLOT7 PCI-E 3.0 X16 OPROM
PCIE M.2-M1 OPROM
PCIE M.2-M2 OPROM
Select Disabled to deactivate the selected slot, select Legacy to activate
the slot in legacy mode, and select EFI to activate the slot in EFI mode.
The options are Disabled, Legacy, and EFI.
Onboard LAN1 SUPPORT
Use this feature to enable the onboard LAN1 device. The options are
Disabled and Enabled .
Onboard LAN Option ROM type
Use this feature to select the type of option ROM installed. The options
are EFI and
Legacy .
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer us -
ing a PXE device installed in a LAN port specified. Select Disabled to
prevent system boot using a device installed in a LAN port. The options
are Disabled and PXE .
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI
(Unified Extensible Firmware Interface) for network stack support. The
options are Disabled and Enabled. If this feature is enabled, the two
features below become available.
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, IPv4 PXE boot option will
not be supported. The options are Disabled and
Enabled .
Ipv4 HTTP Support
Use this feature to enable IPv4 HTTP boot support. The options are
Disabled and Enabled.