Supero C7H61 Скачать руководство пользователя страница 90

Страница: 90 / 101

4-24

C7H61 User’s Manual

Save As User Defaults

To set this feature, select Save as User Defaults from the Exit menu and press
<Enter>. This enables the user to save any changes to the BIOS setup for future use

Restore User Defaults

To set this feature, select Restore User Defaults from the Exit menu and press <En-

ter>. Use this feature to retrieve user-defined settings that were saved previously.

Boot Override

Set this feature to override a previously defined boot device. The available devices

will be listed below.

Launch EFI Shell from filesystem device

This feature when initiated, will attempt to launch an EFI shell application (shellx64.

efi) from one of the available file system devices. Press <Enter> to activate.



Reset System with ME disabled Mode

If this feature is activated, the system will reset and temporarily disable ME. Press
<Enter> to activate.

Содержание C7H61






































































































Результаты поиска

Содержание C7H61

Отзывы:

Supero C7H61, Руководство пользователя, Страница: 90 / 101

Результаты поиска

Содержание C7H61

Отзывы: