Supero AS-1041M-T2 Plus, Руководство пользователя

Страница: 64 / 98

6-6
AS1041M-T2+ User's Manual
Figure 6-4. Removing a SATA Drive from the Server
SATA Backplane
The SATA drives plug into a backplane that provides power, drive ID and bus termi-
nation. A RAID controller can be used with the backplane to provide data security.
The operating system you use must have RAID support to enable the hot-swap
capability of the drives. The backplane is already preconfi gured, so there are no
jumpers or switches present on it.DVD-ROM and Floppy Drives
The top cover of the chassis must be opened to gain full access to the DVD-ROM
and fl oppy drive bays. The 1041M-T2+ accomodates only slim-line DVD-ROM
drives. Side mounting brackets are needed to mount a slim-line DVD-ROM drive
in the 1041M-T2+ server.
Installing a DVD-ROM or Floppy Drive
You must power down the system before installing or removing a fl oppy or DVD-
ROM drive.
First, grasp the two handles on either side and pull the unit straight out until it
locks (you will hear a "click").
Release the thumbscrew at the rear of the top chassis cover.
Depress the two buttons on the top of the chassis and at the same time, push
the cover away from you until it stops. You can then lift the top cover from the
chassis to gain full access to the inside of the server.
1.
2.
3.