3-3
Chapter 3: Installation
3-4 Installing the Windows Operating System
Follow the steps below to install the drivers needed for your Windows OS support.
The controller comes with a driver on the CD-ROM CDR-NIC.
1. Run the CDR-NIC. (If you do not have a product CD-ROM, download drivers
from the Supermicro Support Website and then transfer them to your system.)
2. When the SUPERMICRO window appears, click on the computer icon next to
the product model.
Note
: If the
FOUND NEW HARDWARE WIZARD
screen displays on your
system, click CANCEL.
3. Click on INSTALL DRIVERS AND SOFTWARE.
4. Follow the prompts to complete the installation.
3-5 Installing Drivers and Firmware
Use the procedures below to install both drivers and firmware for the AOC-UIBF-m1
add-on card for both Linux and Windows.
Linux Drivers
Use the following procedures for installing AOC-UIBF-m1 drivers for the Linux
operating system.
Installing InfiniBand Drivers for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > InfiniBand > Linux.
