Supero A1SA2-2550F, Руководство пользователя

Страница: 13 / 87

Chapter 1: Introduction
1-5
Connector Description
Battery Onboard Battery (JBAT1)
J20 HDD Backplane Slot for SATA 3.0 6Gb/s (4 connections) and power
supply
J37 Port 80 connector for Node 1 (P1-PORT80)
J38 Port 80 connector for Node 2 (P2-PORT80)
JKVM1 USB 2.0 (x2)/VGA (Monitor)/COM (UART) connector for front I/O support
for remote console redirection or network interface.
IPMI_LAN IPMI Dedicated LAN for Node 1 and Node 2
P1-LAN1/LAN2 Gigabit LAN Ethernet (RJ45) Ports 1/2 for Node 1
P2-LAN1/LAN2 Gigabit LAN Ethernet (RJ45) Ports 1/2 for Node 2
PWR Power switch for Node 1 and Node 2
SW2 Node switch between Node 1 and Node 2
USB 2.0 Front Panel USB 2.0 (See JKVM1)
A1SA2-2750/2550F Motherboard Connectors/Jumpers/LEDs
Jumper Description Default
JBT1/JBT2 CMOS Clear for Node 1 (JBT1) and Node 2 (JBT2) Off (Normal)
JPG1/JPG2 VGA Enable for Node 1 (JPG1) and Node 2 (JPG2) Pins 1-2 (Enabled)
JPL1/JPL2 Ethernet LAN Ports Enable for Node 1 (JPL1) and Node 2
(JPL2) Pins 1-2 (Enabled)
JWD1/JWD2 Watch Dog Enable for Node 1 (JWD1) and Node 2 (JWD2) Pins 1-2 (Reset)
LED Description Color/State Status
LED1 BMC Heartbeat LED for Node 1 Green: Blinking BMC: Normal
LED2 BMC Heartbeat LED for Node 2 Green: Blinking BMC: Normal
LED7 (UID) Unit Identifier LED Blue: On Blue: Unit Identified
LED8 Overheat/PWR Fail/ Fan Fail LED Red: Solid on
Blinking
On: Overheat
Blinking: PWR Fail or Fan Fail
PLED1 Power LED for Node 1 Green: On
Orange: Standby Node 1 PWR On/Standby
PLED2 Power LED for Node 2 Green: On
Orange: Standby Node 2 PWR On/Standby