Supero A+ Server 4022G-6F, Руководство пользователя

Страница: 73 / 122

Chapter 5: Advanced Serverboard Setup
5-25
Power LED
DP3 is an Onboard Power LED. When
this LED is lit, it means power is present
on the serverboard. Be sure to turn off the
system and unplug the power cord(s) before
removing or installing components.
Power LED
(DP3)
State System Status
On Standby power present
on motherboard
Off No power connected
SAS2008 Heartbeat LED
(LEDS1)
State System Status
Blinking SAS Controller is Active
Off SAS Connector Inactive
SAS2008 Heartbeat LED
The LEDS1 SAS2008 Heartbeat LED on the
H8DG6/H8DG6-F serverboards shows SAS2
activity on the serverboard. See the table to
the right for information on this LED.
BMC Heartbeat (DP1)
LED Settings
Color Status Definition
Green Blinking BMC: Normal
Off Off Not functioning
normally
BMC Heartbeat LED
A BMC (Baseboard Management Control)
Heartbeat LED is located at DP1 on the
motherboard. When DP1 is on, the BMC
Controller functions normally. See the tables
at right for more information.
UID LED (LE1)
A rear UID LED Indicator, located at LE1,
works in conjunction with the rear UID switch
to provide easy identification for a unit that
might be in need of service. Refer to Page
2-13 for further UID details.