Supero 7042M-6, Руководство пользователя

Страница: 3 / 106

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 7042M-6. Installation and maintainance should be performed by ex-
perienced technicians only.
The SuperServer 7042M-6 is a high-end, dual processor 4U tower/
rackmountable server based on the SC742S-420 4U rackmount server chas-
sis and the P4DMS-6GM, a dual processor motherboard that supports single
or dual Intel Xeon
®
processors of 1.50 to 2.40 GHz and faster at a Front
Side (system) Bus speed of 400 MHz and up to 12 GB PC1600 (DDR-200)
SDRAM main memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER P4DMS-
6GM mainboard and the SC742S-420 chassis, which make up the Super-
Server 7042M-6.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
7042M-6 into a rack and check out the server configuration prior to power-
ing up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections
of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.