manualshive.com logo in svg

Supero 2027R-AR24, Руководство пользователя

Поделиться
Скачать
Supero 2027R-AR24 Скачать руководство пользователя страница 99

Chapter 7: BIOS

7-9

Factory Long Duration Maintained

This item displays the period of time set by the manufacturer during which long 
duration power is maintained.

Long Duration Maintained

This item displays the period of time during which long duration power is main-
tained.

Recommended Short Duration Power

This item displays the short duration power settings recommended by the 
manufacturer.

Short Duration Power Limit

This item displays the period of time during which short duration power is 
maintained.

Chipset Confi guration

North Bridge

This feature allows the user to con

fi

 gure the settings for the Intel North Bridge.

IOH (IO Hub) Confi guration

Intel VT-d

Select Enabled to enable Intel Virtualization Technology support for Direct I/O 
VT-d by reporting the I/O device assignments to the VWM (Virtual Working 
Memory) through the DMAR ACPI Tables. This feature offers fully-protected 
I/O resource sharing across Intel platforms, providing greater reliability, security 
and availability in networking and data-sharing. The options are 

Enabled

 and 

Disabled.

Intel® I/OAT

The Intel I/OAT (I/O Acceleration Technology) signi

fi

 cantly reduces CPU over-

head by leveraging CPU architectural improvements, freeing the system resource 
for other tasks. The options are 

Disabled

 and Enabled.

DCA Support

Select Enabled to use Intel's DCA (Direct Cache Access) Technology to improve 
data transfer ef

fi

 ciency. The options are 

Enabled

 and Disabled.

Содержание 2027R-AR24































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды