Supero 2022TG-HLIBQRF, Руководство пользователя

Страница: 88 / 122

6-12
A+ SERVER 2022TG-HLIBQRF/HLTRF USER'S MANUAL
5. Lay the first motherboard in the drawer aligning the standoffs with the
motherboard.
6. Secure the motherboard to the drawer using the rounded, Phillips head
screws included for this purpose. Apply no more than 8 inch-pounds to avoid
damaging the board and components.
7. Install the adapter card associated with the motherboard if the chassis is a
hot-swappable version. Refer to the next section for instructions on installing
the adapter card.
8. Secure the CPUs, heatsinks, and other components to the motherboard as
described in the motherboard documentation.
9. Connect the cables between the motherboard, backplane, chassis, front
panel, and power supply, as needed. Fans may be temporarily removed to
allow access to the backplane ports.
10. Replace the add-on card bracket and secure the bracket with a screw.
11. Repeat for each motherboard drawer.
12. Connect the AC power cord.
Caution: Do not slide serverboard into the tray as this will damage components on
the bottom of the board.
Caution: To avoid damaging the serverboard and its components, do not apply force
greater than 8 lbf*inch to mounting screws.
Figure 6-11. Installing the Motherboard in the Motherboard Node Drawer
Note : The drawing is an example only. The actual layout may differ slightly.