manualshive.com logo in svg

Supermicro X9DRG-O-PCIE, Руководство пользователя, Страница: 86 / 119

Поделиться
Скачать
Supermicro X9DRG-O-PCIE Скачать руководство пользователя страница 86

4-8

             X9DRG-O(T)F-CPU/X9DRG-O-PCIE Platform User’s Manual

Intel

®

 Virtualization Technology (Available when supported by the CPU)

Select Enabled to support Intel Virtualization Technology, which will allow one 
platform to run multiple operating systems and applications simultaneously in 
multiple partitions, creating multiple "virtual" systems in one physical computer. 
The options are 

Enabled

 and Disabled. 

Note

: If there is any change to this setting, you will need to reboot the 

system for the change to take effect. Please refer to Intel’s website for 
detailed information.) 

PPIN Support (Available when supported by the CPU)

Select Enabled to enable Protected Processor Inventory Number (PPIN) support, 
which will allow the Ivy Bridge server processors to return 64-bit ID numbers. The 
options are 

Enabled

 and Disabled. 

  CPU Power Management Configuration

This submenu allows the user to configure the following CPU Power Management 

settings.

Power Technology

Select  Energy  Efficiency  to  support  power-saving  mode.  Select  Custom  to 

customize system power settings. Select Disabled to disable power-saving fea-

tures. Select Max Performance to configure power mode to allow for maximum 

system performance. The options are Disabled, 

Energy Efficient

, Custom and 

Max Performance. If the option is set to Custom, the following items will display:

EIST (Available when Power Technology is set to Custom)

Select Enabled to support EIST (Enhanced Intel SpeedStep Technology) 
which will allow the system to automatically adjust processor voltage and 
core frequency to reduce power consumption and heat dissipation. The op-
tions are Disabled and 

Enabled

. 

Turbo Mode (Available when Power Technology is set to Custom 

and EIST is enabled)

This feature allows processor cores to run faster than marked frequency in 

specific conditions. The options are Disabled and 

Enabled.

C1E Support (Available when Power Technology is set to Custom)

Select Enabled to enable Enhanced C1 Power State to boost system per-
formance. The options are 

Enabled

 and Disabled.

Содержание X9DRG-O-PCIE
























































































































Отзывы:

Нет отзывов