Supermicro X7SLM, Руководство пользователя

Страница: 22 / 83

2-2
X7SLM/X7SLM+ User's Manual
X7SLM/X7SLM+
Tools Needed
1. Philip Screwdriver
2. Pan head #6 screws
Installation Instructions
Install the IO shield into the chassis. 1.
Locate the mounting holes on the motherboard. Refer to the layout above for 2.
mounting hole locations.
Locate the matching mounting holes on the chassis. Align the mounting holes 3.
on the motherboard against the mounting holes on the chassis.
Install standoffs in the chassis as needed. 4.
Install the motherboard into the chassis carefully to avoid damage to mother- 5.
board components.
Insert a Pan head #6 screw into a mounting hole on the motherboard and its 6.
matching mounting hole on the chassis, using a Philips screwdriver. Do not
use a force greater than 8 lb/inch on each screw.
Repeat Step 4 to insert #6 screws to all mounting holes. 7.
Make sure that the motherboard is securely placed on the chassis. 8.
2-2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting
fasteners, metal ones are highly recommended because they ground the mother-
board to the chassis. Make sure that the metal standoffs click in or are screwed in
tightly. Then use a screwdriver to secure the motherboard onto the motherboard
tray. Note: Some components are very close to the mounting holes. Please take
precautionary measures to prevent damage to these components when installing
the motherboard to the chassis.
Pan head
6-32 x 5 mm
[0.197]