Supermicro X7DWN Plus Скачать руководство пользователя страница 58

Страница: 58 / 99

3-4

X7DWN+ User's Manual

create the BIOS

ash

oppy disk. Insert the

oppy disk into the system you wish

ash the BIOS. Then, bootup the system to the

oppy disk. The BIOS utility will

automatically

ash the BIOS without any prompts. Please note that this process

may take a few minutes to complete. Do not be concerned if the screen is paused

for a few minutes.

Warning

: Do not shut down or reset the system while updating the BIOS

to prevent possible system boot failure!)

Question:

What's on the CD that came with my motherboard?

Answer:

The supplied compact disc has quite a few drivers and programs that

will greatly enhance your system. We recommend that you review the CD and

install the applications you need. Applications on the CD include chipset drivers

for the Windows OS, security and audio drivers.

3-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required

before any warranty service will be rendered. You can obtain service by calling

your vendor for a Returned Merchandise Authorization (RMA) number. When

returning to the manufacturer, the RMA number should be prominently displayed

on the outside of the shipping carton, and mailed prepaid or hand-carried. Ship-

ping and handling charges will be applied for all orders that must be mailed when

service is complete.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor

rst for any product prob-

lems.

Содержание X7DWN Plus




































































































Результаты поиска

Содержание X7DWN Plus

Отзывы:

Похожие инструкции для X7DWN Plus

Бренды по названию

Популярные бренды

Supermicro X7DWN Plus, Руководство пользователя

Результаты поиска

Содержание X7DWN Plus

Отзывы:

Похожие инструкции для X7DWN Plus

Бренды по названию

Популярные бренды