Chapter 4: UEFI BIOS
123
•
FQDN
• Serial Number
• Time Validity Pass
Note:
If the feature shows "Provision Record is not present", it means there is no
data entered.
Provisioning Server address
Press <Enter> to set the provisioning server address. It could be either host name,
IPv4, or IPv6 address.
Provisioning server port number
Press <Enter> to set the provisioning server port number. The value should be between
0 and 65535. The default is 9971.
Remote Configuration
Use this feature to enable or disable the remote configuration.
The options are Dis-
abled and
Enabled
.
*If the feature above is set to Enabled, the following features will become avail-
able for configuration:
PKI DNS Suffix
Press <Enter> to set a value for the PKI DNS Suffix.
Manage Certificates
Use this feature to enumerate the hashes in the system. Select the desired hash item
using the arrow key to display the Hash Name, the active state, and the default state.
Stop Remote Configuration
Press <Enter> to swap between Stop Remote Configuration and Active Remote Con
-
figuration. The default is
Active Remote Configuration
.
Power Control
These configurations are effective only after ME provisioning has started.
ME ON is Host Sleep States
Use this feature to set a desired power package.
The options are
Desktop: ON in S0
and Desktop: ON in S0, ME Wake in S3, S4-5.
