P
ackage
c
ontents
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) I/O Shield
• One (1) Quick Reference Guide
• One (1) GPU to CPU Power Cable
Connector
Description
12V_PUMP_PWR1
12V 4-pin Power Connector for CPU Liquid Cooling Pump
AUDIO FP
Front Panel Audio Header
BATTERY
Onboard Battery
COM1/COM2
COM1: COM Port (Back Panel), COM2: COM Header
CPU SLOT1/3/5/7 PCI-E 3.0 x16
PCI-E x16 Slots (PCI-E x16 link)
*PCI-E SLOT1 will change to PCI-E x8 link when either M.2-C03 or M.2-C04 is populated with an
SSD. PCI-E SLOT1 will be completely disabled when either M.2-C01 or M.2-C02 is populated with
an SSD.
CPU SLOT2/4/6 PCI-E 3.0 x8 (IN x16) PCI-E x16 Slots (PCI-E x8 link)
FAN1 ~ 6
CPU Fan Headers
FAN A ~ D
System Fan Headers
*The initial system fan speed must not be lower than 600 RPM.
HD AUDIO
Back Panel High Definition Audio
IPMI_LAN
Dedicated IPMI LAN Port
*For IPMI support, X11SPA-TF is via SPS, whereas X11SPA-T is via ME.
I-SATA0~7
Intel Serial ATA (SATA 3.0) Ports 0~7 (6Gb/sec)
I-SGPIO1/I-SGPIO2
Serial General Purpose I/O Headers
JD1
Speaker/Power LED Indicator
JF1
Front Control Panel Header
JIPMB1
4-pin External I2C Header (for an IPMI card)
JL1
Chassis Intrusion Header
JOH1-OH
Overheat LED Indicator
JP4/JP5
JP4: Enable/Disable USB10/11, JP5: Enable/Disable USB8/9
JPI2C1
Power Supply SMBus I2C Header
JPUSB1
Enable/Disable USB6/7 WakeUp
JPWR1/3/4
+12V 8-pin CPU Power Connectors (Required)
JPWR2
24-pin ATX Main Power Connector (Required)
JRK1
Intel RAID Key Header
*A VROC hardware key is required to enable an M.2 RAID card.
JSD1/JSD2
SATA DOM (Disk-On-Module) Power Connectors
JSPDIF_OUT
Sony/Philips Digital Interface (S/PDIF) Out Header
JSTBY1
Standby Power Header (5V)
JTPM1
Trusted Platform Module (TPM)
LAN1/LAN2
RJ45 1GbE/10GbE LAN Ports
M.2-C01/C02/C03/C04 PCI-E 3.0 x4
PCI-E M.2 Connectors (Small Form Factor Devices and Other Portable
Devices for High Speed NVMe SSDs)
UID-SW
Unit Identifier (UID) Switch
USB0/1
Front Access USB 2.0 Header
USB2/3
Front Access USB 3.1 Gen1 Header
USB4/5, USB6/7
Back Panel USB 3.1 Gen1 Ports
*X11SPA-TF and X11SPA-T do not support S3 or S4.
*Either USB4/5 or USB6/7 will support standby power.
USB8/9
Back Panel USB 3.1 Gen2 Ports
USB10
Front Access USB 3.1 Gen2 Header
USB11
Front Access USB 3.1 Gen2 Port (Type A)
VGA
VGA Port
Jumpers and Connectors
Jumpers
Jumper
Description
Default
J9701/J9702
Manufacturing Mode
Pins 1-2 (Normal)
JPAC1
Audio Enable/Disable
Pins 1-2 (Enabled)
JPG1
VGA Enable/Disable
Pins 1-2 (Enabled)
JPL1/JPL2
LAN1/LAN2 Enable/Disable
Pins 1-2 (Enabled)
JPME2
Intel Manufacturing Mode
Pins 1-2 (Normal)
JWD1
Watch Dog Function Enable
Pins 1-2 (RST)
Connectors
