37
Chapter 2: Installation
OH/Fan Fail LED
20
NIC1 Activity LED
19
HDD LED
FP PWRLED
3.3V Stby
3.3V Stby
UID LED (X11SCZ-F only)
X
Ground
NMI
X
NIC2 Activity LED
3.3V Stby
3.3V Stby
Power Button
Reset Button
Reset
PWR
Ground
Ground
1
2
Power Fail LED (X11SCZ-F only)
3.3V (X11SCZ-F only)
Overheat (OH)/Fan Fail
Connect an LED cable to OH/Fan Fail connections on pins 7 and 8 of JF1 to provide warnings
for chassis overheat/fan failure. On X11SCZ-F, this connection will also serve as an IPMI UID
indicator as a blue LED. Refer to the table below for pin definitions.
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least 4 seconds. Refer to the table below for pin definitions.
Power Button
Pin Definitions (JF1)
Pins
Definition
1
Signal
2
Ground
OH/Fan Fail Indicator
Pin Definitions (JF1)
Pin#
Definition
Off
Normal
On
Overheat
Flashing
Fan Fail
OH/Fan Fail LED
Pin Definitions (JF1)
Pins
Definition
7
Vcc/Blue UID LED
8
OH/Fan Fail LED
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
Reset Button
Pin Definitions (JF1)
Pins
Definition
3
Reset
4
Ground
1. Power Button
2. Reset Button
3. Overheat/Fan Fail
1
3
2
