Supermicro X11SCE-F, Руководство пользователя

Страница: 29 / 95

29
Chapter 2: Installation
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMB2, DIMMA2, then DIMMB1,
DIMMA1. For optimal performance, use
memory modules of the same type and
speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.
J25
BMC_HB_LED1
A C
JTPM1
BT1
+
JBT1
LED5
A
C
I-SA
TA6
JSD1
SW2
J22
JKVM1:
JPME2 JPG1
JPME1 JBR1
SRW3
SRW4
BIOS
LICENSE
MAC CODE
DESIGNED IN USA
X11SCE-F
REV:1.02
USB0/1
UID
CPU MICRO-LP
PCIE 3.0 X8
DIMMB2 DIMMA2 DIMMB1 DIMMA1
VGA
CPU
JSD1:SA
TA
DOM POWER
BAR CODE
JWD1