Supermicro X11SAE-M, Руководство пользователя

Страница: 74 / 108

X11SAE-M User's Manual
74

DMI/OPI Configuration
The following DMI information will display:
•
DMI
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled .
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are
Enabled
and Disabled.
CPU DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and
L1 .
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enabled and
Disabled .
DMI De-Emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6dB and
-3.5dB .

PEG Port Configuration
CPU SLOT7 PCI-E 3.0 X16
SLOT7 Max Link Speed
This feature allows the user to select PCI-E support for the device installed on SLOT1. The
options are
Auto , Gen 1, Gen 2, and Gen 3.
SLOT7 Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are Auto , 128
TLP, and 256 TLP.
SLOT7 Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is
75 .
SLOT7 Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x , 0.1x, 0.01x, and 0.001x.