Supermicro X11DPU-Z+, Руководство пользователя

Страница: 34 / 131

34
Supe X11DPU-Z+ User's Manual
Installing an HFI Carrier Card for Host Fabric Interface (HFI)
Support as Needed (Available when an F Model CPU is Used)
Note: Two host fabric interface carrier card headers (JHFI1/JHFI2) are located on the
motherboard. JHFI1 is used for CPU1; JHFI2, for CPU2. If one F model CPU is used,
install it on CPU Socket#1 first. Following the steps below to enable HFI support for
CPU1. If needed, repeat the same steps to enable HFI support for CPU2. (For more
information on the JHFI1/JFHI2 headers, please refer to page 51.)
Installation Instructions
1. Locate CPU Socket#1 on the motherboard. Install an F model CPU on CPU Socket#1.
(For CPU2 HFI support, install an F model CPU on Socket#2.)
2. Locate the PCI-E slots the motherboard. Install a Host Fabric Interface (HFI) card on a
PCI-E slot supported by CPU1. (For CPU2 HFI support, install an HFI card on a PCI-E
slot supported by CPU2.)
3. Connect the HFI connector on the HFI cable to the onboard JHFI1 header as show
below (marked 3 below.) (Connect the HFI cable to JHFI2 for CPU2 HFI support.)
4. Connect the other end of the HFI cable to the connector (marked
A
) on the HFI card as
shown below. (Marked 4 below.)
5. Connect the plug (marked 5) on one end of the Internal_Faceplate_to_the_Processor
(IFP) cable to the connector (marked ) on the HFI card as shown below.
6. Connect the other end of IFP cable (marked 6) to the F model CPU installed in the CPU
as shown below. Repeat the same steps to enable HFI support for CPU2.
B
BAR CODE
BIOS
LICENSE
IPMI CODE
BP
PWR2
BP
PWR1
P1-DIMMC1
I-SATA4~7
P1-DIMMB2
I-SATA0~3
P1-DIMMB1 P1-DIMMC2 P1-DIMMA1 P1-DIMMA2
CPU1_POR
T2C
SXB3B
JWD1
JVRM1
JVRM2
CPU1_POR
T3C
CPU1_POR
T3A
CPU1_POR
T2A
SXB3C
CPU1_POR
T1A
SXB3A
P1-DIMMD2 P1-DIMMD1P1-DIMME2 P1-DIMME1
P1-DIMMF1 P1-DIMMF2
USB0/1(3.0)
CPU2
CPU1
BATTERY
COM1
IPMI_LAN
UID
USB3/4(3.0)
P2-DIMMC2 P2-DIMMC1 P2-DIMMB1 P2-DIMMB2 P2-DIMMA1 P2-DIMMA2
CPU2_DMI
PCH_POR
T1
CPU2_POR
T1A
SXB2
VGA
SXB1C
CPU2_POR
T2A
CPU2_POR
T2C
SXB1A
P2-DIMMD2 P2-DIMMD1 P2-DIMME2 P2-DIMME1 P2-DIMMF1 P2-DIMMF2
USB2(3.0)
GPU PWR2
X11DPU-Z+
REV:1.01
JS1
JHFI2
JSD1 JSD2
S-SA
TA4
S-SA
TA5
NVME13
NVME12
JHFI1 JNVI2C1
NVME11
NVME10
JPW2
T-SGPIO3
FAN4
JRK1
JSDCARD1
JBT1
BT1
LEDM1
SXB1_3
LE2
JNVI2C2
GPU PWR1
JGPW4
JGPW2
JUSB3
FAN8
LED1
JUSBA1
SP1
JIPMB1
FAN1
FAN2
FAN3
FAN5
FAN6 FAN7
JPG1
JPME1
JF1
SXB1_2
SXB3_2
PSU1
JPW3
JPW1
JPW4
SXB3_3
SXB1_1
SXB3_1
JL1
JUIDB2
JTPM1
JS2
CPU2_POR
T3A
SXB1B
CPU2_POR
T3C
BMC
BIOS
PCH
PSU2
JHFI1 Header
(for CPU1)
B
A
JHFI1
JHFI2 Header
(for CPU2)
3
4
6
5
1
F Model
Processor
HFI (Host Fabric
Interface) Sideband
Cable
HFI Carrier
Card
3. Connect the HFI connector
on the HFI cable to the
onboard JHFI1 header.
IFP Cable (Optional)
Install an F model CPU
on Socket#1 (and another
F model CPU on Socket#2 if needed.
Then repeat Step 1 to Step 6
for HFI support for CPU2.)
2
2. Install an HFI card to a PCI-E slot
4. Connect another end of
the HFI cable to the
connector (A)
of the HFI card.
5. Connect one end of
the IFP cable to the
connector (B)
of the HFI card.
6. Connect the other end of
the IFP cable to the
F model CPU.