Supermicro X11DPU-X Скачать руководство пользователя страница 106

Страница: 106 / 129

Super X11DPU-X/-XLL User's Manual

106

TXT Support

Select Enabled to enable Intel Trusted Execution Technology (TXT) support to enhance
system security and data integrity. The options are

Disabled

and Enabled.

Note 1

: If the option for this item (TXT Support) is set to Enabled, be sure to disable

EV DFX (Device Function On-Hide) support for the system to work properly. (EV DFX

is under "IIO Configuration" in the "Chipset/North Bridge" submenu)

Note 2:

For more information on TPM, please refer to the TPM manual at http://www.

supermicro.com/manuals/other.



iSCSI Configuration

iSCSI Initiator Name

This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.

Once the name of the iSCSI Initiator is entered into the system, configure the proper settings

for the following items.



Add an Attempt



Delete Attempts



Change Attempt Order



Intel® Virtual RAID on CPU

When this submenu is selected and the RAID devices are detected, the BIOS screen displays
the following items:
Intel® VROC with VMD Technology 5.0.0.1205

Содержание X11DPU-X


































































































































Результаты поиска

Содержание X11DPU-X

Отзывы:

Похожие инструкции для X11DPU-X

Бренды по названию

Популярные бренды

Supermicro X11DPU-X, Руководство пользователя

Результаты поиска

Содержание X11DPU-X

Отзывы:

Похожие инструкции для X11DPU-X

Бренды по названию

Популярные бренды