Supermicro X11DPG-SN, Руководство пользователя

Страница: 71 / 222

Chapter 3: Troubleshooting
71
3.3 Battery Removal and Installation
Battery Removal
To remove the onboard battery, follow the steps below:
1. Power off your system and unplug your power cable.
2. Locate the onboard battery as shown below.
3. Using a tool such as a pen or a small screwdriver, push the battery lock outwards to
unlock it. Once unlocked, the battery will pop out from the holder.
4. Remove the battery.
Proper Battery Disposal
Please handle used batteries carefully. Do not damage the battery in any way as a damaged
battery may release hazardous materials into the environment. Please comply with the
regulations set up by your local hazardous waste management agency to dispose of your
used battery properly. Do not discard a used battery in the garbage or a public landfill.
Battery Installation
To install an onboard battery, follow the steps below:
1. Power off your system and unplug your power cable.
2. Locate the onboard battery as shown below
3. Identify the battery's polarity. The positive (+) side should be facing up.
4. Insert the battery into the battery holder and push it down until you hear a click to
ensure that the battery is securely locked.
Important:
When replacing a battery, be sure to only replace it with the same type.
LITHIUM BATTERY
BATTERY HOLDER
LITHIUM BATTERY
BATTERY HOLDER