Supermicro X11DPG-OT-CPU, Руководство пользователя

Страница: 11 / 120

11
Chapter 1: Introduction
Note : To avoid causing interference with other components, please be sure to use an
add-on card that is fully compliant with the PCI-standard on a PCI slot.
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal) (See Chpt. 2)
JPG1 VGA Enable Pins 1-2 (Enable)
JPME1 Manufacturing Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset to System)
Connector Description
BT1 Onboard CMOS battery
CN10/CN11 x4 Oculink connectors connected to CPU2 for NVMe drive use
COM1 COM/serial port for front access
FAN1-10 System cooling fan headers (FAN1-FAN8 ) & active CPU heatsink fan headers (FAN9/FAN10)
IPMI_LAN Dedicated IPMI LAN port
LAN1/LAN2 10GbE LAN Ethernet ports 1/2 on the I/O back panel
JF1 Front panel control header
JIPMB1 4-pin System Management Bus (SMBus) I
2
C header (for an IPMI-supported card)
JL1 Chassis Intrusion header
JM2-1 PCI-E M.2 slot
JNCS1
Add-on card header used for the add-on card that supports NCSI (Network Communication
Services Interface)
JNVI
2
C1/ JNVI
2
C2
NVMe SMBus (I
2
C) headers used for PCI-E hot-plug SMBus clock & data connections (an
SMCI-proprietary NVMe add-on card and cable are required for each NVMe SMBus header.
This feature is available for a Supermicro complete system only.)
JPW19/20, JPW 21/22 SMCI-proprietary power supply units 19/20, 21/22 for system use
JPWR1-8, JPWR9-16 8-pin power supply connectors 1-8, 9-16
JRK1 Intel RAID Key header for NVMe Solid State Device (SSD) use
JSDCARD1 BMC_SD card header
JTPM1 Trusted Platform Module/Port 80 connector
JUIDB1 UID (Unit Identifi er) switch
(I-)SATA 0-3(JS1), 4-7 (JS2) SATA 3.0 headers with support of 8 SATA connections (JS1: SATA 0-3, JS2: SATA 4-7)
S-SATA0 S-SATA3.0 port with power-pin built-in w/support of SuperDOM (Device-On Module)
USB0 Type A internal USB 2.0 header (USB Port 0)
USB1/2, 3/4 Backplane Universal Serial Bus (USB) 3.0 ports 1/2, 3/4
VGA VGA Port
LED Description Status
LE1 UID (Unit Identifi er) LED Solid Blue: Unit identifi ed
LE2 Power LED On: Onboard power on
LED1 M.2 Power LED On: M.2 power on
LEDM1 BMC Heartbeat LED Blinking Green: BMC normal