20
BIOS
LICENSE
MAC CODE
BAR CODE
X11DAi-N
REV:1.01
6 DIMM
Installation
1. Follow the instructions given in the
memory population guidelines listed in
the previous sections to install memory
modules on your motherboard. For the
system to work properly, please use
memory modules of the same type and
speed on the motherboard. (See the Note
below.)
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
DIMM module straight down into the slot
until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
7 DIMM
Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Release Tabs
Notches
Insert the DIMM module into the memory slot.
Note:
All graphics including the layout drawing above are for reference only. Your sys-
tem components may look or may not look the same as graphics shown in this guide.
DIMM Population Guidelines
