Supermicro X10DRT-PS, Руководство пользователя

Страница: 47 / 111

Chapter 2: Installation
2-25
1
1
JUSB1
JBAT1
LE6
S-SATA3
JSM2
JSM1
JPME2
JVRM1
JVRM2 JPG1 JPB1
JWD1
UID_LED1
BMC_HB_LED1
PLD1
JF1
JTPM1
JSD1
JBT1
SXB1
SLOT2
BIOS
LICENSE
X10DRT-PS
REV:1.00
JUIDB1
SIOM
SIOM:CPU1 PCI-E 3.0 X16
CPU2 PCI-E 3.0 X16
S-SA
TA0~2
TPM/POR
T80
CPU2 SLOT1 PCI-E 3.0 X16COM1
IPMI_LAN
P2-DIMMF1 P2-DIMME2 P2-DIMME1 P2-DIMMF2
BATTERY
USB0/1(3.0)
BIOS
FLASH
BMC
UID SW
VGA
CPU2_VRM_HS1
P2-DIMMG2 P2-DIMMH1 P2-DIMMH2 P2-DIMMG1
CPU2 SLOT2
PCI-E 3.0 X8
I-SA
TA0~5
CPU1 PCI-E 3.0 X8
P1-DIMMC1 P1-DIMMC2 P1-DIMMD1 P1-DIMMD2
P1-DIMMA1 P1-DIMMA2 P1-DIMMB1 P1-DIMMB2
CPU1
CPU2
1
1
PCH
SXB2
Bar Code
2-9 Onboard LED Indicators
A. IPMI LAN LEDs
B. Onboard PWR
LED
IPMI_LAN LEDs
An IPMI_LAN port, supported by the ASpeed
AST 2400 Baseboard Management Control-
ler (BMC), is located on the I/O backpanel.
This LAN port has two LED indicators. The
amber LED on the right indicates activity,
while the link LED on the left indicates the
speed of the connection. See the tables at
right for more information.
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Link LED Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Definition
Link (Left) Green 100 Mbps
Amber 1 Gbps
Activity (Right) Amber: Blinking Active
A
A
Onboard Power LED
The Onboard Power LED is located at LE6
on the motherboard. When this LED is on,
the system is on. Be sure to turn off the
system and unplug the power cord before
removing or installing components. See the
table at right for more information.
B
Onboard PWR LED Indicator
LED States
Color/State Definition
Off
System PWR Off (PWR
cable not connected)
Orange Standby PWR Ready
Green All PWR RAMP
Normal
Red One or more PWR
Regulators: Failed