manualshive.com logo in svg

Supermicro SuperWorkstation 5049A-TR, Руководство пользователя, Страница: 21 / 189

Поделиться
Скачать
Supermicro SuperWorkstation 5049A-TR Скачать руководство пользователя страница 21

Chapter 2: Installation

21

Chapter 2  

 

Installation

2.1 Overview

This chapter provides advice and instructions for rack or workstation installation. The system is 

shipped in a workstation configuration. Follow the steps in this chapter to prepare the chassis 
for rackmounting or for returning the chassis into a workstation configuration. 

If your system is not already fully integrated with processors, system memory etc., refer to 

Chapter 3 for details on installing those specific components.

Caution: 

Electrostatic Discharge (ESD) can damage electronic components. To prevent such 

damage to PCBs (printed circuit boards), it is important to use a grounded wrist strap, handle 
all PCBs by their edges and keep them in anti-static bags when not in use.

2.2 Preparing for Rack or Workstation Setup

Please read this section in its entirety before you begin the installation. Whether you are 
operating the system in a rack environment or as a workstation, follow a few general 
precautions.

General Precautions

• 

Review the electrical and general safety precautions in Appendix B.

• 

Use a regulating uninterruptible power supply (UPS) to protect the system from power 
surges and voltage spikes and to keep your system operating in case of a power failure.

• 

Allow any drives and power supply modules to cool before touching them.

• 

To maintain proper cooling, always keep all chassis panels closed and all SATA carriers 
installed when not being serviced.

Содержание SuperWorkstation 5049A-TR






























































































































































































Отзывы:

Нет отзывов