27
SuperStorage SSG-136R-N32JBF User's Manual
3.3 Chassis Components
Drives
Your system may or may not have come with drives installed. Up to thirty-two hot-swappable
2.5" NVMe SSDs are supported by the chassis (16 drives in each sled).
The drives are mounted in drive carriers to simplify their installation and removal from the
chassis. (Both procedures may be done without removing power from the system.)
Extending a Sled
1. For one sled, swing both sled latches fully out.
2. Grasp the sled latches and use them to extend the sled out of the chassis.
Notes:
1. Do not leave a sled extended from the chassis for longer than two minutes. 2. Use
Supermicro qualified NVMe SSDs only. For information on recommended SSDs, visit the
Supermicro website at
http://www.supermicro.com/products/nfo/storage.cfm
.
Figure 3-2. Extending the Sled
1
1
Top View
Pull
Pull
1
2
Sled #1
Sled #2
Sled #1
Sled #2
