44
SuperServer E200-9B User's Manual
Spread Spectrum Clock
If this feature is set to Enabled, the BIOS will monitor the level of electromagnetic interference
caused by the components and will attempt to reduce the interference whenever needed.
The options are Enabled and
Disabled
.
Graphics Power Management Control
RC6 (Render Standby)
Select Enabled to enable render standby support.The options are Disabled and
Enabled
.
Memory Configuration Options
MRC Fast Boot
Use this feature to enable or disable fast boot through the memory reference code (MRC).
The options are
Enabled
and Disabled.
Scrambler
Select Enabled to enable memory scrambler support. The options are
Enabled
and Disabled.
RH Prevention
Select Enabled to prevent Row Hammer attacks by increasing the average time between
sending REF commands to DRAM. The options are
Enabled
and Disabled.
Max TOLUD (Top of Low Usable DRAM)
This feature sets the maximum TOLUD value, which specifies the "Top of Low Usable DRAM"
memory space to be used by internal graphics devices, GTT Stolen Memory, and TSEG,
respectively, if these devices are enabled. The options are
2GB
and 3GB.
South Bridge
The following South Bridge information will be displayed:
Azalia Configuration
Audio Configuration
Audio Controller
Select Enabled to enable the Azalia Audio Controller. The settings are
Enabled
and Disabled.
Azalia VCi Enable
Select Enabled to enable the Virtual Channel 1 of the Azalia Audio Controller. The settings
are
Enabled
and Disabled.