Chapter 5: BIOS
41
Monitor Mwait
Select Enabled to enable the Monitor/Mwait instructions. The Monitor instructions monitors
a region of memory for writes, and MWait instructions instruct the CPU to stop until the
monitored region begins to write. The options are
Disabled
and Enabled.
P-STATE Coordination
This feature allows the user to change the P-State (Power-Performance State) coordination
type. P-State is also known as "SpeedStep" for Intel processors. Select HW_ALL to change
the P-State coordination type for hardware components only. Select SW_ALL to change the
P-State coordination type for all software installed in the system. Select SW_ANY to change
the P-State coordination type for a software program in the system. The options are
HW_All
,
SW_ALL, and SW_ANY.
Chipset
Warning:
Setting the wrong values in the following sections may cause the system to malfunc-
tion.
North Bridge
The following memory information will be displayed:
•
Memory Slot 0
Graphics Configuration
GOP Configuration
GOP Driver
The Graphics Output Protocol (GOP) driver is a replacement for legacy video BIOS that
accesses UEFI protocols. The options are
Enable
and Disable.
LVDS Panel Support
Use this feature to select the supported IGFX graphics device ouput to the LVDS panel.
The options are Disabled and
Enable
.
*If LVDS Panel Support is set to Enable, the next five features will be available for
configuration:
Panel select
Use this feature to select the panel resolution. The options are
Disable
, 800x600, 1024x768,
1280x1024, 1366x768, 1680x1050, and 1920x1200.
Panel Channel Type
Use this feature to select the Panel Channel Type. The options are
Disabled
, Odd Channel,
Even Channel, and Both Channel.
