35
Chapter 5: BIOS
Wait For "F1" If Error
This feature forces the system to wait until the F1 key is pressed if an error occurs. The
options are Disabled and
Enabled
.
Re-try Boot
If this feature is enabled, the BIOS will automatically reboot the system from a specified boot
device after its initial boot failure. The options are
Disabled,
Legacy Boot, and EFI Boot.
Watch Dog Function
If this feature is enabled, the Watch Dog timer will allow the system to reboot when it is inactive
for more than five minutes. The options are
Disabled
and Enabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override for the user to power off the system after pressing and holding the power
button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are
Instant Off
and
4 Seconds Override.
AC Loss Policy Depend on
Use this feature to set the power state after a power outage. Select Power Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off,
Power on
,
and
Last State
.
EuP Support
EuP, Energy Using Product, is a European energy-saving specification that sets a standard
on the maximum total power consumption on electrical products. The options are
Disabled
and Enabled.