manualshive.com logo in svg

Supermicro SuperServer 7049P-TR, Руководство пользователя

Поделиться
Скачать
Supermicro SuperServer 7049P-TR Скачать руководство пользователя страница 50

SuperServer 7049P-TR(T) User's Manual

50

Installing a Storage Drive into a 5.25" Tray

One 3.5" drive, or two 2.5" drives with an optional bracket (pn MCP-220-00044-0N) can be 
installed. An optional expansion card and cables are also required.

1. Remove the tray from the drive bay.

2. For a 3.5" drive, place the drive in the drive tray, and secure the drive to the tray with 

four screws from the bottom.

For one or two 2.5" drives, install the drives into the special purpose bracket, then secure 
the bracket to drive tray with screws through the bottom of the tray.

Figure 3-12. Installing 2.5" Drives into the Bracket

Drive

Bracket

Figure 3-11. Installing a 3.5" Drive to the Drive Tray

Drive

Drive Tray

3. Slide the drive tray into the chassis until the tray clicks into place.

4. Connect the data and power cables for the new drive.

5. Replace the chassis cover and power up the system.

Содержание SuperServer 7049P-TR
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды