Supermicro SUPERSERVER 6035B-8, Руководство пользователя

Страница: 20 / 124

2-4
S
UPER
S
ERVER 6035B-8R/6035B-8 User's Manual
2-4 Installing the System into a Rack
This section provides information on installing the SuperServer 6035B-8R/6035B-8
into a rack unit. If the 6035B-8R/6035B-8 has already been mounted into a rack,
you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack units on
the market, which may mean the assembly procedure will differ slightly. The fol-
lowing is a guideline for installing the 6035B-8R/6035B-8 into a rack with the rack
rails provided. You should also refer to the installation instructions that came with
the rack unit you are using.
Identifying the Sections of the Rack Rails
You should have received two rack rail assemblies with the SuperServer 6035B-
8R/6035B-8. Each of these assemblies consist of two sections: an inner fi xed
chassis rail that secures to the chassis (A) and an outer fi xed rack rail that secures
directly to the rack itself (B). All screws and hardware mentioned in the installation
steps should be included in the hardware kit.
To remove the fi xed chassis rail (A), pull it out as far as possible - you should hear
a "click" sound as a locking tab emerges from inside the rail assembly and locks
the inner rail. Then depress the locking tab to pull the inner rail completely out.
Do this for both the left and right side rack rail assemblies.
Figure 2-1. Identifying the Sections of the Rack Rails
A
B
Locking Tab