Supermicro SUPERSERVER 6025W-UR, Руководство пользователя

Страница: 12 / 108

1-4
S
UPER
S
ERVER 6025W-UR User's Manual
1-3 Server Chassis Features
The following is a general outline of the main features of the SC825TQ-R700U
server chassis.
System Power
The SC825TQ-R700U features a redundant 700W power supply composed of two
separate power modules. This power redundancy feature allows you to replace a
failed power supply without shutting down the system.
Serial ATA Subsystem
The SC825TQ-R700U supports up to eight 3 Gb/s Serial ATA drives. The Serial
ATA drives are hot-swappable units and are connected to a backplane that provides
power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
PCI Expansion Slots
When confi gured as a 6025W-UR server, the SC825TQ-R700U suppports expan-
sion cards on both the left and right sides of the chassis:
Left side: UIO card and three PCI-Express x8 cards (with RSC-R2UU-UA3E8 riser
card.)
Right side: two PCI-Express x4 cards (with RSC-R2UU-2E8R riser card).
Left and right refer to the side when viewed from the front of the chassis.
Front Control Panel
The control panel on the SuperServer 6025W-UR provides you with system monitor-
ing and control. LEDs indicate system power, HDD activity, network activity, system
overheat and power supply failure. A main power button and a system reset button
are also included. In addition, two USB ports have been incorporated into the control
panel to provide front side USB access.