Supermicro SUPERSERVER 6023L-8R, Руководство пользователя

Страница: 73 / 110

Chapter 7: AMIBIOS
7-1
Chapter 7
AMIBIOS
7-1 Introduction
This chapter describes the AMIBIOS for the
S
UPER
S
ERVER 6023L-8R. The
AMI ROM BIOS is stored in a Flash EEPROM and can be easily upgraded
using a floppy disk-based program.
Note: Due to periodic changes to BIOS, some settings may have been
added or deleted and might not yet be recorded in this manual. Refer to the
Manual Download area of our web site for any changes to BIOS that are
not reflected in this manual.
System BIOS
The BIOS is the Basic Input Output System used in all IBM ® PC, XT™, AT ® ,
ATX, and PS/2 ® compatible computers. The BIOS ROM stores the system
parameters, such as amount of memory, type of disk drives and video
displays, etc. BIOS ROM requires very little power. When the computer is
turned off, a back-up battery provides power to the BIOS ROM, enabling it
to retain the system parameters. Each time the computer is powered-on, the
computer is then configured with the values stored in the BIOS ROM by the
system BIOS, which gains control when the computer is powered on.
How To Change the Configuration Data
The configuration data that determines the system parameters may be
changed by entering the BIOS Setup utility. This Setup utility can be ac-
cessed by pressing <Del> at the appropriate time during system boot.
Starting the Setup Utility
Normally, the only visible POST (Power On Self Test) routine is the memory
test. As the memory is being tested, press the <Delete> key to enter the
main menu of the BIOS Setup utility. From the main menu, you can access
the other setup screens, such as the Chipset and Power menus. Section 4-
3 gives detailed descriptions of each parameter setting in the Setup utility.
An AMIBIOS identification string is displayed at the left bottom corner of the
screen, below the copyright message.