Supermicro SUPERSERVER 6022P-i, Руководство пользователя, Страница: 14 / 102

S
UPER
S
ERVER 6022P-i Manual
1-4
Memory
The P4DPi-G2 has eight 184-pin DIMM slots that can support up to 16 GB of
registered ECC DDR-200 (PC1600) SDRAM. Module sizes of 128 MB, 256
MB, 512 MB, 1 GB and 2 GB may be used to populate the DIMM slots.
(PC2100 is also supported, but only at a speed of 200 MHz. The P4DPI-G2
was designed to support 2 GB DIMM modules for each memory slot, but it
has only been validated with 1GB memory modules.)
PCI Expansion Slots
The 6022P-1 comes with a three-slot riser card that fits into the SXB (Super
Extended Bus) slot on the P4DPi-G2. Three standard size PCI-X cards can
be installed into the riser card and be supported by the SC822 chassis
backplane.
ATI Graphics Controller
The P4DPi-G2 features an integrated ATI video controller based on the Rage
XL graphics chip. Rage XL utilizes 8 MB of memory and fully supports
sideband addressing. This onboard graphics package can provide a band-
width of up to 512 MB/sec over a 32-bit graphics memory bus.
Onboard Controllers/Ports
The P4DPi-G2 includes one floppy drive controller and two onboard IDE
controllers, which support up to four hard drives or ATAPI devices.
Backpanel I/O ports include one COM port, two USB ports, PS/2 mouse and
keyboard ports, a video (monitor) port and an Intel ANVIK controller for dual
Gigabit Ethernet LAN ports.
Other Features
Other onboard features are included to promote system health. These in-
clude various voltage monitors, two CPU temperature sensors, four fan
speed sensors, a chassis intrusion header, auto-switching voltage regula-
tors, chassis and CPU overheat sensors, virus protection and BIOS rescue.